{"id":5222,"date":"2013-02-15T18:57:57","date_gmt":"2013-02-15T23:57:57","guid":{"rendered":"http:\/\/www.monocoque-metalworks.com\/main\/?p=5222"},"modified":"2015-02-18T13:01:02","modified_gmt":"2015-02-18T18:01:02","slug":"restored-e-type-bonnet-wings-inner-valances-for-sale","status":"publish","type":"post","link":"https:\/\/www.monocoque-metalworks.com\/main\/2013\/02\/restored-e-type-bonnet-wings-inner-valances-for-sale\/","title":{"rendered":"Restored E-Type Bonnet Wings & Inner Valances For Sale!"},"content":{"rendered":"

We had a chance to prime some of the “stock” pieces we were working on last week, and these pieces are all available for sale – which is RARE around here – so get them while you can!<\/p>\n

These perfectly restored original panels fit MUCH BETTER than the “new” panels – IF you can find them in stock somewhere.\u00a0 These have two coats of high-quality, DuPont self-etching primer over scuffed bare steel – they are all READY TO GO – and COST LESS that the poorly fitting “new” reproductions!\u00a0 If you need it – get it before someone else does!<\/span><\/strong><\/p>\n

Usually, customers call and ask for panels, and we choose good, restorable panels from our stock, and then restore those panels to order.\u00a0 What you are seeing here are THE BEST OF THE BEST – panels that needed very little metalwork aside from “blast and prime”.\u00a0 Each of these has been hunted down by me personally, and picked up and delivered here safely by me as well.\u00a0 This is not your typical eBay crap filled with Bondo, rust, dents, and undercoating – go back a few blogs and you can see many of these same pieces in bare metal, These are all 100%, 100-point show-car ready!\u00a0 These panels would almost never be available – just kept on the shelf for future projects or the shops we work with closely, BUT…<\/p>\n

On March 4th, we are FINALLY going to have the new shop finished off inside!\u00a0 And we’re not fooling around – we’re going ALL OUT with this – bathroom, office, customer area, packing area, insulation, central air and heating, flooring – THE WORKS!\u00a0 It will still be relatively small, but it will be comfortable and have everything we need.\u00a0 That means we need two things ASAP – space and a little extra funding!\u00a0 We are clearing out project cars and parts left and right – there’s just too much E-Type stuff around here! <—- hmmmm, didn’t think I’d ever say that!<\/p>\n

So take a look – if there’s something here you can use, give me a call.\u00a0 These panels are all originals that have been blasted bare, any dents or wrinkles hammered out and smoothed, and any rust areas seamlessy patched.\u00a0 But there is very little of either on these panels – and we have “before, during, and after photos” of every panel to prove what is under this\u00a0thin layer of rather expensive self-etching primer – nothing but solid steel, baby…<\/p>\n

Don’t wait – call now! And even if it is already sold, we can still grab more panels from our stock and build whatever you need – ALWAYS to this high standard!<\/p>\n