{"id":10381,"date":"2014-12-30T18:41:48","date_gmt":"2014-12-30T23:41:48","guid":{"rendered":"http:\/\/www.monocoque-metalworks.com\/main\/?p=10381"},"modified":"2015-02-18T12:29:23","modified_gmt":"2015-02-18T17:29:23","slug":"series-1-e-type-bonnet-project-part-2-assembly-primer","status":"publish","type":"post","link":"https:\/\/www.monocoque-metalworks.com\/main\/2014\/12\/series-1-e-type-bonnet-project-part-2-assembly-primer\/","title":{"rendered":"Series 1 E-Type Bonnet Project \u2013 Part 2 \u2013 Assembly & Primer"},"content":{"rendered":"

In the second half of this blog entry, you’ll see photos of what the finished product from Monocoque Metalworks looks like.<\/p>\n

In my somewhat biased opinion, you simply cannot have a bonnet better than what is shown in these photos for your E-Type:<\/p>\n

    \n
  1. It is an original bonnet from the factory – every dimension, curve, and especially the internal features are all EXACTLY as they should be.<\/li>\n
  2. Because it is an original piece, it is going to fit ANY original E-Type body shell quite well with a “normal” amount of shimming and trimming of the rear edge.<\/li>\n
  3. Every square inch of every panel – inside and out – has been blasted bare and coated in 2 liberal coats of the best 2-part epoxy primer available – it will NEVER rust – and is guaranteed against rust for your lifetime!<\/li>\n<\/ol>\n

    Take a look at what we can do with YOUR bonnet!<\/p>\n