Jaguar E-Type – Bonnet Panels

Bonnet Restoration is our most common task here at the shop – we do 2 bonnets for every 1 body shell.  Over the years, we have perfected the fabrication of nearly every panel and section – of every Series – of the E-Type Bonnet.  As a result, it is IMPOSSIBLE for you to need a repair panel for your bonnet that we cannot provide!

Whatever “problem” your E-Type bonnet has – we have the answer – call us today and we’ll solve the problem together!

NOTE:  Series 3 Bonnet panels are shown toward the bottom of the page.

Click Here to purchase panels in our NEW Online Store!

Series 1.5 Covered Headlamp Conversion Flanges – $385 per set.  These flanges are used to convert your existing Series 1.5 open headlamp center section and wings to Series 1 covered headlamp specs.  Painstakingly hand-crafted, we are the only source WORLDWIDE for these flanges.  Look through our blogs below for examples and instructions showing how these flanges are installed.

SAVE!!!  – Series 1.5 Covered Headlamp Conversion Kit – $889.00.  Contains all  steel panels required to convert a Series 1.5 bonnet to Series 1 specs –  including 4 outer skin conversion flanges, 2 Series 1 headlamp scoops,  and 2 Series 1 headlamp diaphragms.

Series 2 & 3 Covered Headlamp Conversion Flanges – $385 per set.  These flanges are used to convert your existing Series 2 or 3 open headlamp center section and wings to Series 1 covered headlamp specs.  Painstakingly hand-crafted, we are the only source WORLDWIDE for these flanges.  The wide, center section flanges are true works of art – curving in multiple directions – these pictures do not do them justice, but they will fit your bonnet like a glove!  Look through our blogs below for examples and instructions showing how these flanges are installed.

SAVE!!!  – Series 2 Covered Headlamp Conversion Kit – $889.00.   Contains all  steel panels required to convert a Series 2 bonnet to  Series 1 specs –  including 4 outer skin conversion flanges, 2 Series 1 headlamp scoops,  and 2 Series 1 headlamp diaphragms.  For Series 3 bonnets, a custom  headlamp diaphragm is required – available by special order.

Series 1 Covered Headlamp Diaphragms:  RH – BD16422 – $210.00,  LH – BD16423 – $210.00.  These panels are exact reproductions of the original Series 1 diaphragms, but are also used on Series 1.5 and 2 when converting to covered headlamps using the flange sets above.  Standard Series 1.5 and Series 2 headlamp diaphragms are also available – call for availability.  Standard Series 3 headlamp diaphragms shown below.

Series 1 Headlamp “Sugar Scoops” – BD17651 & BD17652 – $139 per pair.  These are exact reproductions of the original Series 1 scoops, with wider rear flanges that strengthen them so that the keep their shape during shipping and assembly.  These are also required when converting a later Series bonnet to covered headlamps using the flange sets above.

Complete Bonnet Flange Set – $385.00.  19 & 20-gauge steel – fits ALL 6-cylinder E-Type Bonnets.  Series 3 V-12 complete set (not shown) – $195.00.  We also offer a set of just the four wing flanges (the 4 "boomerang" flanges shown) which are the most  prone to badly rusting – $139.00. If your  flanges are twisted, or badly  rusted (which is very common) – a set of our flanges will save you time,  and trust me, ALOT of frustration!  The shape and curvature of our  flanges is EXACT, and assembling the bonnet will be MUCH easier.

Bonnet Lower Valance Support Member – 3.8 style with horn brackets (shown) – $585.00.  4.2 style without horn brackets – $545.00.  Fits ALL 6-cylinder E-Type bonnets – does NOT fit Series 3 V-12 E-Types (see below.)  This piece is an EXACT reproduction of the original, and can be used to salvage your lower valance without the $1250.00 cost of a poor quality reproduction.  Made from 19-gauge steel, we have sold and installed dozens of these supports – they are DEAD ON!

Bonnet Lower Valance Support Member – 3.8 style with horn brackets (shown) – $585.00.  4.2 style without horn brackets – $545.00.  Additional Photo.

Bonnet Lower Valance Support Member – 3.8 style with horn brackets (shown) – $585.00.  4.2 style without horn brackets – $545.00.  Additional Photo.

Bonnet Wing Rear Repair Panel – $185.00.  These panels are painstakingly made to order, and are correct in EVERY way – including the outer curvature which cannot be seen in this photo.  Customers may order this panel in whatever dimensions they like, with or without a stepped flange at the top edge (for welding into place by the method of their choosing.)

Bonnet Mudshield – RH – BD16381 – $85.00.  Fits ALL 6-cylinder E-Types.  19-gauge steel – our accuracy is unmatched anywhere.

Bonnet Mudshield – ALUMINUM – RH – BD16381 – $135.00.  Fits ALL 6-cylinder E-Types.  .050 thickness with coated steel wired edge. Photo is taken from the front of car to show wired edge.

Bonnet Mudshield – LH – BD16382 – $85.00.  Fits ALL 6-cylinder E-Types.  19-gauge steel – our accuracy is unmatched anywhere.

Bonnet Mudshield – ALUMINUM – LH – BD16382 – $135.00.  Fits ALL 6-cylinder E-Types.  .050 thickness with coated steel wired edge. Photo is taken from the front of car to show wired edge.

Bonnet Air Duct Lower Panel – Series 1 – BD16557 – $48.00.  19-gauge steel.  Series 2 is also available – it is a different size and shape (even though most other catalogs show the same part for Series 1 and 2…)  This panel is also available in aluminum.

All Panels below this point fit Series 3 V-12 E-Types.

Bonnet Air Duct Lower Panel – Series 3 – $235.00.  19-gauge steel – correct shape WITH the beaded reinforcement that other reproductions lack…

Lower Valance Support Member – Series 3 V-12 – $450.  19-gauge steel.  This is a multiple piece assembly that must be fitted into the lower valance with the lower air duct panel shown above – it is recommended to purchase both pieces together.

Headlamp Diaphragm Panel – Series 3 V-12 – LH – BD36755 – $120.00.  19-gauge steel.

Headlamp Diaphragm Panel – Series 3 V-12 – RH – BD36754 – $150.00.  19-gauge steel.

Bonnet Mudshield – Series 3 V-12 – LH – BD36757 – $82.00.  19-gauge steel.

Bonnet Mudshield – Series 3 V-12 – RH – BD36756 – $82.00.  19-gauge steel.

Click Here to purchase panels in our NEW Online Store!

TO ORDER:  Use our Online store at the link above – OR – Call us or send an email with your needs, including your E-Type’s year and body style (coupe, roadster, or 2+2).

We will help you put together an order that includes EXACTLY what panels you need to do the job right!  We accept PayPal, Mastercard, Visa, Personal Checks, and Cash.

(443) 907-2287 – ask for Chuck – anytime

chuck@monocoque-metalworks.com

This entry was posted in - ONLINE PANEL CATALOG -. Bookmark the permalink.